Wind Speed WS-3500M

Last Updated

20 May 2019

Minimum Order

1 unit

Specification of Wind Speed WS-3500M

Designed to use T.C.T. Broach Cutter.
Cuts up to diameter 35 mm and 50 mm deep.
Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
Light weight, only 14 Kg.

Model	WS-3500M
Voltage (Single Phase)	220 ~ 240V AC 50 / 60 Hz
Motor Power Consumption	1100 W
No-load Speed	780 rpm
Adjustable in height for max. stroke	100 mm
Coolant Supply	Via Tool Holder
Magnet Power Consumption	38 W
Magnet Adhesion	7350 N/ 750 kgf
Magnet Dimensions	186 mm x 80 mm x 58 mm
Weight	14 kg
T.C.T. Broach Cutter	Hole Diameter	Plate Thickness
	14-35 mm	9-50 mm
Twist Drill	1-13 mm