Specification of KSU-W80-HOT-JET
Features
- As our blower adopted the electric diaphragm blower design, it has a simple discharging structure, and its bobbin (heater) has high durability as it always blows fresh air to the inside of the heater gun without need for an axis receiver or a rotary van. With simplified supplies, it shows fewer defects, high durability against long-term operation, and less noise as it does not need oil.
Specifications
| Model | KSU-W80-HOT-JET |
| Voltage | AC 220 V |
| Max Output | 700 W |
| Head Pipe | 400 ℃ |
| Dimension | 280 (L) × 220 (W) × 200 (H)mm |
| Wind Pressure | 20.1kg/㎠ (80ℓ/min) |
| Noise | 45 - 55 db |
Gambar 1 (Fig 1) - Gambar 2 (Fig 2)
Standart accessories:
~Thermal plastic welding gun
~Heating element
Welding Method
~Make the angle of the tip sharp by cutting along the dotted lines,
as shown in(Fig 1), wigh a heated-tip welding ROD B
~As shown in (Fig 1), operate HEATER GUN nozzle C in direction 1-2-3-4 with the heating
ROD Band parent material A. then press with the rod (Fig 2) in the downward direction
Untuk keterangan lebih lanjut, silahkan download PDF ini :
Read More
